Non Medical KN95 Protective Face Mask

MATERIALS

LAYER NO. 1: 50 GSM NON WOVEN FABRIC

LAYER NO. 2: 25 GSM MELT-BLOWN CLOTH

LAYER NO. 3: 25 GSM MELT-BLOWN CLOTH

LAYER NO. 4: 40 GSM FILTER SPONGE

LAYER NO. 5: 30 GSM NON-WOVEN FABRICA

STANDARD: GB2626-2006

TYPE: NON MEDICAL RESPIRATOR

FILTRATION EFFICIENCY: 95%

REUSABILITY: REUSE IS POSSIBLE IF NOT VISIBLY STAINED OR DAMAGE (SUCH AS CREASES OR TEARS)

COLOR: COLOR CAN BE CUSTOMIZED

Safety standards of KN95 Protective Face Mask

N95 masks are one of nine standards set by NIOSH in 1995. "N" means "not resistant to oil". "95" means that when exposed to a specified number of specific test particles, the concentration of particles in the mask is 95% lower than that outside the mask. 95% of the value is not the average value, but the minimum value, so the average value of actual products is mostly set above 99%.

Other NIOSH levels include N99, N100, R95, R99, R100, P95, P99, and P100, all of which cover the N95 range. The "R" is for oily or non-oily particles, and should be used for no more than eight hours. "P" means suitable for oily or non-oily particulate matter, and if used for oily particulate matter, the use time shall follow the manufacturer's recommendation. "99" and "100" refer to filtration efficiency levels, respectively.

According to the oil resistance is divided into "N", "R", "P", according to the capture rate is divided into "95", "99" and "100". "R" means "resistant to oil", "P" means "oil proof", and the "99" in capture rate means more than 99 per cent, and "100" means more than 99.7 per cent.

In addition, when testing N100, P100 and R100 masks with 0.3 micron particles, the barrier efficiency must be above 99.7%; N99, P99 and R99 all have filtration rate above 99%, while N95, P95 and R95 all have filtration rate above 95%.

Therefore, the N95 mask is tested with 0.3 micron sodium chloride particles, with a barrier rate of 95% or above, and the tightness of the wearer's face is tested to ensure that air can enter and exit through the mask under the condition of closely sticking to the face edge. Only those that meet this test will issue the N95 certification number. Generally speaking, protective masks certified by existing domestic standards are not able to meet the N95 standard.

FAQ

Q: Are you a manufacturer or a trading company?

A: We are A trading company located in wenzhou, zhejiang province.Welcome to visit our company.

Q: Can you offer customized services?

A: Yes, it can be customized.

Q: When is your delivery time?

A: 2 to 3 days, depending on the quantity ordered.If you are looking for a product, we will give you specific information about the delivery time.If you need an urgent order, please contact us to discuss your specific requirements.

Q: What is the MOQ?

A: The minimum order quantity for disposable masks is usually 5000 pieces.

http://www.chinaworldmachine.com/