Â
1. Heating Technology:
- Patent heating technology with independent circulation air design.
- Suitable for BGA and CSP component welding.
- High thermal efficiency and energy-saving.
- Fast heating speed.
Â
2. Air Duct Design:
- Unique air duct design from Heller technology in the United States.
- Imported air distribution device for uniform air distribution.
- High heat exchange efficiency.
Â
3. Temperature Control:
- Independent temperature control for each welding zone (±2°C accuracy).
Â
4. Temperature Zones:
- Maximum 100°C difference between adjacent zones.
- Independent adjustment of temperature and hot air speed.
- Suitable for BGA/CSP and 0201 welding.
Â
5. Temperature Curves:
- Ideal for debugging temperature curves in various models.
- Dual or triple welding zone settings.
- PROFILE TEST △T as low as 8°C.
- Suitable for lead-free welding processes.
Â
6. Motor and Components:
- Imported high-temperature motor for direct drive hot air heating.
- Good thermal balance, low noise, and minimal vibration.
- 0201 components remain stable.
Â
7. Rapid Heating:
- Heats up from room temperature to working temperature in approximately 20 minutes.
- Excellent thermal compensation (difference < 5°C).
Â
8. Design and Maintenance:
- Modular design for easy maintenance.
Â
9. Cooling Zones:
- Two independent micro-circulation cooling zones.
- Optional forced internal circulation cooling system and flux recovery system.
Â
Â
Model |
HX-230AF |
HX-330AF |
Dimensions(LxWxH) |
380x320x300mm |
1500x650x700mm |
Color |
ivory white |
|
Weight |
Approx 40kg |
Approx 150kg |
Heating zones |
Up 1/Bottom 1 |
Up 3 |
Heating zones length |
300mm |
1000mm |
Cooling zones |
2 zone (top and bottom) |
|
Heating structure |
Small loop structure |
|
Pumping wind |
10m³/min 2 passageway |
Â
Control System |
 | |
Power |
Single phase electricity 220V50/60Hz (customizable) |
|
Total power |
3Kw |
6Kw |
Starting power |
3Kw |
6Kw |
Normal power |
1Kw |
2Kw |
Heating time |
Apporx 15min |
|
Temp range |
Room Temp -320℃ |
|
Temp control method |
Thermostat PID closed loop control +SSR drive |
|
Temp accuracy |
±2℃ |
|
Lateral temp deviation |
±2℃ |
|
Par ameterstor age |
Process parameters can be stored |
|
Abnormal alarm |
Abnormal temperature alarm |
Â
Transportation System |
 | |
Wesh belt structure |
Stainless steel monolithic |
|
Transmission structure |
High temperature gear transmission,round shaft and bearing support |
|
Max width |
Drawer type 300x200mm/Mesh beIt 300mmå¯withstand 30Kg(Customizable) |
|
Ninimum widtt |
Infinitesimal |
|
Inner height |
20mm(Customizable) |
|
Transportation directio |
left→right(Optional:Right→left) |
|
Transportation method |
Drawer type |
mesh belt |
Working height |
320±20mm(customizable) |
|
Transport belt speed |
100-2000mm/min (customizable) |
|
Lubricating oil |
Manual refueling |
Â
Cooling system |
 |
Cooling method |
High temperature resistant fan forced normal air cooling |
0ption |
 |
Full hot air system |
Can be equipped with up and down full hot air heating |
Computer control |
Equipped with Mitsubishi PLC and Dell display,industrial control |
Â
http://www.hxcnsmt.com/